jpgFeature/sdesk 696 implement raw brick http
NEED HELP?
TrackSense Pro Basic Wireless Data Logger - Double Smart Flex Temperature Sensor

TrackSense Pro Basic Wireless Data Logger - Double Smart Flex Temperature Sensor

The superior quality wireless TrackSense® Pro data loggers are made of a high resistant stainless steel with high-end technology that allows for immensely accurate and stable measurements when performing various thermal processes.

The Double Smart Flex Temperature Sensor has a temperature range of -30 °C to +105 °C with an accuracy of ±0.1 °C (in range -30 °C to +105 °C). It can be used within various industries for applications like environmental testing, and is ideal for situations involving hard-to-reach areas.

The TrackSense® Pro data loggers are configured with interchangeable sensors to measure temperature, relative humidity, CO2 pressure, and conductivity. The data loggers can easily be activated and read by the Multi reader station, and when combined with the Sky module, they provide real time data via wireless communication.

 

Contact Sales

Technical Specifications

Sensor:

Interchangeable Double Smart Flex Temperature

Temperature Measuring Range:

-30 to +105 °C

Diameter:

1.8 mm

Length:

100 - 1,000 mm (1,700 mm)

Position of Measuring Point from Round Tip:

3 mm

Accuracy:

-30 to +105 °C:

± 0.1 °C

Sensor Response Time:

T-63%:

2.16 Sec.

T-90%:

4.31 Sec.

Logger:

Pro Basic

Operating Temperature:

-30 to +105 °C

Operating Pressure*:

0.001 mBar to 4 Bar ABS

House Material:

316 L Stainless Steel

Diameter:

25 mm

Length:

44 mm

Weight With Battery:

48 Grams

Memory Capacity:

60,000 Data Points

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga, -30°C ≤ Tamb ≤ +105°C

Time Accuracy:

± 5 Seconds Per 24 Hours

Battery:

TSP Standard Battery

If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

ValSuite™ Validation Software

ValSuite™ Validation Software

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:

  • ValSuite™
  • ValSuite™ Medical
  • ValSuite™ Plus
  • ValSuite™ Pro 
Learn more
Multi Reader Station for Data Loggers

Multi Reader Station for Data Loggers

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

Learn more
Sky Module for Wireless Communication

Sky Module for Wireless Communication

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.

Learn more

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.
Close