jpgFeature/sdesk 696 implement raw brick http
TrackSense Pro X Wireless Data Logger - Double Semi Flex Temperature Sensor

TrackSense Pro X Wireless Data Logger - Double Semi Flex Temperature Sensor

The superior quality wireless TrackSense® Pro X data loggers are made with high-end technology that allows for accurate and stable measurements when performing various thermal processes. The Pro X logger is highly versatile, but excels at low temperature applications.

The Double Semi Flex Temperature Sensor is equipped with dual stainless steel semi flexible sensors. This feature makes it easy to control the positioning of the measuring point, as the semi flexible sensors will remain fixed when bent. The sensor has a temperature range of -196 °C to +150 °C with an accuracy of 0.1 °C (in range -40 °C to +150 °C).

The TrackSense® Pro X wireless data loggers can be configured with interchangeable sensors able to measure temperature, relative humidity, pressure, conductivity and CO2. Ellab’s data loggers are easy to activate and read by the Multi reader station. When combined with the Sky module, data loggers can provide real time data via wireless communication.


Contact Sales

Technical Specifications


Interchangeable Double Semi Flex Temperature

Temperature Measuring Range:

-196 to +150 °C


1.5 / 2 mm


100 - 1,000 mm

Position of Measuring Point from Round Tip:

3 mm


-196 to -80 °C:

± 2.0 °C (± 0.5 °C if calibrated and adjusted at -196 °C)

-80 to -50 °C:

± 0.3 °C

-50 to -40 °C:

± 0.2 °C

-40 to +150 °C:

± 0.1 °C

Sensor Response Time:


0.4 / 0.5 Sec.


0.7 / 0.8 Sec.


Pro X

Operating Temperature:

-80 to +150 °C

Operating Pressure*:

0.001 mBar to 10 Bar ABS

House Material:

316 L Stainless Steel


25 mm


44 mm

Weight With Battery:

48 Grams

Memory Capacity:

60,000 Data Points

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga,  -60°C ≤ Tamb ≤ +105°C 

Time Accuracy:

± 5 Seconds Per 24 Hours


TSP Standard Battery

If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

ValSuite™ Validation Software

ValSuite™ Validation Software

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:

  • ValSuite™
  • ValSuite™ Medical
  • ValSuite™ Plus
  • ValSuite™ Pro 
Learn more
Multi Reader Station for Data Loggers

Multi Reader Station for Data Loggers

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

Learn more
Sky Module for Wireless Communication

Sky Module for Wireless Communication

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.

Learn more

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.