jpgFeature/sdesk 696 implement raw brick http
NEED HELP?
TrackSense Pro X Wireless Data Logger - Vacuum & Temperature Sensor

TrackSense Pro X Wireless Data Logger - Vacuum & Temperature Sensor

Ellab’s wireless TrackSense® Pro data X loggers consist of high-end technology and resistant stainless steel that allows for immensely stable and accurate measurements within different thermal processes. The Pro X logger is highly versatile, but excels at low temperature applications.

The Vacuum and Temperature Sensor has a pressure range of 0.0001 mBar to 1,000mBar and can document the temperature level at the SIP phase with its temperature range of -80 to +140°C.  It can be used for various applications within the food and pharmaceutical industry and is especially ideal for low temperature applications such as lyophilization/Freeze drying.

All of Ellab’s TrackSense® Pro X data loggers are designed to accommodate for interchangeable sensors to measure temperature, conductivity, pressure, CO2, and relative humidity. The Ellab Sky module, when combined with a data logger, provides real time data via a wireless connection, while the Multi reader station allows users to easily activate and read data loggers. 

 

Contact Sales

Technical Specifications

Sensor:

Interchangeable Vacuum

Measuring Principle:

Micro Pirani

Pressure / Vacuum Measuring Range:

0.0001 mBar to 1,000 mBar (-60 to +80 °C)

Pressure / Vacuum Accuracy:

0.0005 mBar to 0.001 mBar:

20% of reading

0.001 mBar to 100 mBar:

15% of reading

100 mBar to 1,000 mBar

20% of reading

Pressure / Vacuum Sensor Response Time:

0.002 Sec.

Temperature Measuring Range:

-80 to +140 °C

Temperature Accuracy:

± 0.5 °C

Temperature Sensor Response Time:

<120 Sec.

Logger:

Pro X

Operating Temperature:

-80 to +140 °C

Operating Pressure*:

0.0001 mBar to 5 Bar

House Material:

316 L Stainless Steel

Diameter:

25 mm

Length:

44 mm

Weight With Battery:

48 Grams

Memory Capacity:

60,000 Data Points

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga,  -60°C ≤ Tamb ≤ +105°C 

Time Accuracy:

± 5 Seconds Per 24 Hours

Battery:

TSP Standard Battery

If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

ValSuite™ Validation Software

ValSuite™ Validation Software

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:

  • ValSuite™
  • ValSuite™ Medical
  • ValSuite™ Plus
  • ValSuite™ Pro 
Learn more
Multi Reader Station for Data Loggers

Multi Reader Station for Data Loggers

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

Learn more
Sky Module for Wireless Communication

Sky Module for Wireless Communication

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.

Learn more

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.
Close