jpgFeature/sdesk 696 implement raw brick http
NEED HELP?
TrackSense Pro XL Wireless Data Logger - Automarker Sensor

TrackSense Pro XL Wireless Data Logger - Automarker Sensor

The superior quality wireless TrackSense® Pro XL data loggers are made of a high resistant stainless steel with high-end technology that allows for immensely accurate and stable measurements when performing various thermal processes. The XL logger is an enlarged logger with an extended battery capacity, making it ideal for applications involving vast temperature swings.

The AutoMarker sensor can be used to record events during a session. When started, time markers can be added to the session either by manual activation of the switch placed at the cable end or automatically when connected directly to a PLC using the PLC relay function.

Examples of applications the AutoMarker would be used in are:

  • Logging of holding time start/stop from autoclave controller
  • Logging of door openings in warehouse storage, stability chambers, freezers, incubators, etc.
  • Logging of general failure on critical components during process e.g. pump failure
  • Logging emergency shelf cooling activation in freeze dryer

Ellab’s TrackSense® Pro data loggers can all be configured with interchangeable sensors to measure pressure, relative humidity, temperature, CO2, and conductivity. The data loggers are easily activated and read by the Multi reader station and when combined with the Sky module they provide real time date via wireless communication.

 

Contact Sales

Technical Specifications

Sensor:

Interchangeable Automarker

Working Principle:

Contact Free Switch Sensor

Switch Cable Plug Type:

LEMO

Number of Switches Per Sensor:

1

Length of Switch Sensor Cable

100 cm

IP Class:

40

Logger:

Pro XL

Operating Temperature:

+5 to +50 °C

Operating Pressure*:

0.9 - 1.1 Bar ABS

Operating Humidity:

10-95%

Logger House Material:

316 L Stainless Steel

Logger Diameter:

25 mm

Logger Lenght:

68.8 mm

Weight With Battery:

80 Grams

Memory Capacity:

60,000 Data Points

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga,  -55°C ≤ Tamb ≤ +105°C

Time Accuracy:

± 5 Seconds Per 24 Hours

Battery:

TSP 150L Battery

If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

ValSuite™ Validation Software

ValSuite™ Validation Software

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:

  • ValSuite™
  • ValSuite™ Medical
  • ValSuite™ Plus
  • ValSuite™ Pro 
Learn more
Multi Reader Station for Data Loggers

Multi Reader Station for Data Loggers

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

Learn more
Sky Module for Wireless Communication

Sky Module for Wireless Communication

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.

Learn more

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.
Close