jpgFeature/sdesk 696 implement raw brick http
NEED HELP?
TrackSense Pro XL Wireless Data Logger - Multipoint Rigid Temperature Sensor

TrackSense Pro XL Wireless Data Logger - Multipoint Rigid Temperature Sensor

Ellab’s wireless TrackSense® Pro XL data loggers consist of high-end technology and resistant stainless steel that allows for immensely stable and accurate measurements within different thermal processes. The XL logger is an enlarged logger with an increased battery capacity, which makes it ideal for applications involving vast swings in temperature.

The Multipoint Rigid Temperature Sensor is used to determine temperature differences in containers to locate the cold spot with a total of 4 Pt1000 elements measuring simultaneously. It has a temperature range of -80 °C to +150 °C with an unmatched accuracy of 0.05 °C (in range -25 °C to +150°C). The sensor is exceptional within the food industry, as it provides 4 measuring points that can easily identify the cold and hot zones in containers.

All TrackSense® Pro data loggers are configured with interchangeable sensors able to measure temperature, relative humidity, pressure, conductivity and CO2. Ellab’s data loggers are easy to activate and read by the Multi reader station. When combined with the Sky module, data loggers can provide real time data via wireless communication.

 

Contact Sales

Technical Specifications

Sensor:

Interchangeable Multipoint Rigid Temperature

Temperature Measuring Range:

-80 to +150 °C

Diameter:

2.5 mm

Length:

50 or 100 mm

Position of Measuring Points:

Marking

Accuracy:

-80 to -50 °C:

± 0.3 °C

-50 to -40 °C:

± 0.2 °C

-40 to -25 °C:

± 0.1 °C

-25 to +150 °C:

± 0.05 °C

Sensor Response Time:

T-63%:

0.5 Sec.

T-90%:

1.10 Sec.

Logger:

Pro XL

Operating Temperature:

-80 to +150 °C

Operating Pressure:

0.001 mBar to 10 Bar ABS

House Material:

316 L Stainless Steel

Diameter:

25 mm

Lenght:

68.8 mm

Weight With Battery:

80 Grams

Memory Capacity:

60,000 Data Points

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga,  -55°C ≤ Tamb ≤ +105°C

Time Accuracy:

± 5 Seconds Per 24 Hours

Battery:

TSP 150L Battery

If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

ValSuite™ Validation Software

ValSuite™ Validation Software

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:

  • ValSuite™
  • ValSuite™ Medical
  • ValSuite™ Plus
  • ValSuite™ Pro 
Learn more
Multi Reader Station for Data Loggers

Multi Reader Station for Data Loggers

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

Learn more
Sky Module for Wireless Communication

Sky Module for Wireless Communication

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.

Learn more

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.
Close