jpgFeature/sdesk 696 implement raw brick http
TrackSense Pro XL Wireless Data Logger - Vacuum & Temperature Sensor

TrackSense Pro XL Wireless Data Logger - Vacuum & Temperature Sensor

The high quality wireless TrackSense® Pro XL data loggers consist of resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes. The XL logger is an enlarged logger with an extended battery capacity, which makes it exceptional for applications involving vast swings in temperature.

The Vacuum and Temperature Sensor has a pressure range of 0.0001 mBar to 1,000mBar and can document the temperature level at the SIP phase with its temperature range of -80 to +140°C.  It can be used for a wide range of applications within the food and pharmaceutical industry and is especially ideal for low temperature applications such as lyophilization/freeze drying.

Ellab’s TrackSense® Pro data loggers can all be configured with interchangeable sensors to measure pressure, relative humidity, temperature, CO2, and conductivity. The data loggers are easily activated and read by the Multi reader station and when combined with the Sky module they provide real time date via wireless communication.


Contact Sales

Technical Specifications


Interchangeable Vacuum

Measuring Principle:

Micro Pirani

Pressure / Vacuum Measuring Range:

0.0001 mBar to 1,000 mBar (-60 to +80 °C)

Pressure / Vacuum Accuracy:

0.0005 mBar to 0.001 mBar:

20% of reading

0.001 mBar to 100 mBar:

15% of reading

100 mBar to 1,000 mBar

20% of reading

Pressure / Vacuum Sensor Response Time:

0.002 Sec.

Temperature Measuring Range:

-80 to +140 °C

Temperature Accuracy:

± 0.5 °C

Temperature Sensor Response Time:

<120 Sec.


Pro XL

Operating Temperature:

-80 to +140 °C

Operating Pressure:

0.0001 mBar to 5 Bar

House Material:

316 L Stainless Steel


25 mm


68.8 mm

Weight With Battery:

80 Grams

Memory Capacity:

60,000 Data Points

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga,  -55°C ≤ Tamb ≤ +105°C

Time Accuracy:

± 5 Seconds Per 24 Hours


TSP 150L Battery

If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

ValSuite™ Validation Software

ValSuite™ Validation Software

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:

  • ValSuite™
  • ValSuite™ Medical
  • ValSuite™ Plus
  • ValSuite™ Pro 
Learn more
Multi Reader Station for Data Loggers

Multi Reader Station for Data Loggers

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

Learn more
Sky Module for Wireless Communication

Sky Module for Wireless Communication

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.

Learn more

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.