jpgFeature/sdesk 696 implement raw brick http
E-Val Pro Sensor Interface

E-Val Pro Sensor Interface

The E-Val Pro Sensor Interface is the ideal solution for expanding the number of measurable parameters available for wired systems. TrackSense Pro Data Logger sensors can be mounted on the interface, allowing it to measure Temperature, Pressure, Vacuum, Relative Humidity (EtO), Conductivity and CO2, all while being connected to the E-Val Pro. 

With the ValSuite™ software and the Sensor Interface, the calculated parameters can be displayed on a PC and directly on the E-Val Pro display.

Using multiple sensors in conjunction with the Sensor Interface (i.e. Double, Quad or Combi sensors) is also a possibility as long as the sensor array channel(s) next to the interface are free.
 

Contact Sales

The sensors and applications shown below are mere examples of what the E-Val Pro Sensor Interface can be used to accomplish. The interface is able to use several additional sensors.
 

Relative Humidity Sensor

The Relative Humidity sensor is especially ideal to determine humidity levels during the validation of warehouses, stability chambers, EtO sterilization processes and environmental chambers.

View sensor details

Conductivity Sensor

Measuring conductivity is required to secure the cleanliness of water in e.g. washer disinfectors before the product can be released or transferred to a sterilizer.



View sensor details

CO2 Sensor

Growing cells in vitro requires controlled and stable ambient conditions. This is why perfect incubation highly depends on measuring various parameters, this includes the amount of CO2. 


View sensor details

Vacuum Sensor

The Vacuum sensor is specifically designed for ultra-high vacuum applications such as lyophilization. Since maintaining a high vacuum is essential for a process like lyphilization, the use of wireless loggers is recommended.

View sensor details

Technical Specifications

Interface

Sensor:

TrackSense Pro Sensors

Communication Protocol

RS485

Operating Temperature:

-40 to +125 °C

Operating Pressure:

0.001 mBar to 10 Bar

Material:

Stainless Steel 316L

Vacuum, CO2 and Relative Humidity (EtO) Senor Requirements:

Connection via 4-Channel Sensor Array

Temperature, Pressure, Relative Humidity, Relative Humidity (EtO/Stability)
and Conductivity Sensor Requirements:

Connection via 4 or 12-Channel Sensor Array

ValSuite:

ValSuite 5.1 or later

Adaptors:

1/2" or 3/4" thread adaptors

Calibration:

Stored in interface until the sensor is changed

Sample Rate:

1 sec. to 24 hours

E-Val Pro Main Firmware Requirements:

4.4.0.3 or later

Array Firmware Requirements:

1.12 or later

Cable

Operating Temperature:

-40 to +70 °C

Length:

5 m

Diameter:

4 mm

Material:

PVC

Plug Type:

USB

Thread Adaptors

Thread Adaptors

Optional thread adaptors for ½” and ¾” feed through systems for chambers.

The stainless steel adaptors are placed onto the ‘female’ threads on the outside of the process (e.g. autoclaves), thereby offering accurate measuring along with a tightly sealed and safe connection.
 

Contact Sales
Follow Us @ Linkedin
Join Us @ Youtube
Contact Us Today
Newsletter Sign up
Sign Up Now

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.
Close