jpgFeature/sdesk 696 implement raw brick http
Temperature and Humidity

Temperature and Humidity

Rental request

Validation equipment recommended for Stability Chambers, Incubators, PhotoStability Chambers / rooms, Warehouses

Wireless Data Loggers

TrackSense Pro Loggers with Smart Flex Sensor

A complete data logger kit could include the following: Tracksense Pro loggers with Smart Flex sensors, Laptop, Temperature Bath, Temperature Standard.

Ellab TrackSense Pro Temperature Loggers work from -80°C to 140°C.  We offer these with Rigid and Bendable probes.

If renting Rigid units then the above application note applies.  If renting bendable units then they can be verified in our dry block temperature baths.  Either way we can still do the pre/post calibration/verification for you.

Ellab TrackSense Pro Humidity Loggers work from 0°C to 90°C and 0 to 100% Relative Humidity

Wireless Data Logger Accessories:

Magnet Clips: Makes for easy placement of your data logger (Not for autoclaved environments)

Silicone Gripper: Our silicone gripper slides over the logger providing a square outer shell which prevents the logger from rolling around.  It also has a loop for hanging the logger.  These can be placed inside of your autoclave.


Thermocouple Based

E-Val Pro

E-Val Pro

A complete thermocouple kit could include the following: E-Val Pro, Thermocouples, Laptop, Temperature Bath, Temperature Standard.

Ellab E-Val Pro: Thermocouple based unit

Option to use your own thermocouples, or purchase thermocouples ready to go from Ellab

Rotronic HC2-S Humidity Sensor:  Wired relative humidity sensor which we source from Rotronic.  It is their most accurate humidity sensor available, and perfect for tight tolerance applications. The wiring harness includes one of our proprietary USB Smart connectors which connects right to the back of our E-Val Pro unit.  Your humidity data will be in the same report as your temperature data.

Ellab can perform pre and post verifications on this humidity sensor if you require.

Verification Equipment recommendation

All of our hardware can connect to the laptop for automated pre and post calibration/verification.

Temperature Bath: Ellab RTC 159A Dry Block:This will get you down to -100°C in a dry environment. It also goes up to 155°C in case you need the higher range. Ellab RTC 156A Dry Block:  This will go down to -30°C and up to 155°C covering the majority of the range that people perform chamber qualifications.

Temperature Probe: Ellab ETS25:This will read from -196°C to 420°C with an accuracy of ±0.025°C

*Optional*:  Ellab can pre-calibrate/verify the thermocouples for you, and upon return post-calibrate/verify those thermocouples and send you a report instead of you renting the hardware to do yourself.


Ellab Inc.
303 E 17th Ave, Suite 10, Denver CO 80203
Phone: +1-303-425-3370

Additional Locations:
New Hampshire - Texas

Follow Us @ Linkedin
Join Us @ Youtube
Contact Us Today
Newsletter Sign up
Sign Up Now

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.