jpgFeature/sdesk 696 implement raw brick http
TrackSense Pro Basic L Wireless Data Logger - High Range Conductivity and Temperature Sensor

TrackSense Pro Basic L Wireless Data Logger - High Range Conductivity and Temperature Sensor

Ellab’s wireless TrackSense® Pro data loggers consist of high-end technology and resistant stainless steel that allows for immensely stable and accurate measurements within different thermal processes.

The High Range Conductivity and Temperature Sensor is sterilizable and has a conductivity range of 200 to 2000 µS/cm and a temperature range of 0 to +85 °C. Conductivity measurements apply to the control / monitoring of industrial processes and to validate the washing disinfection processes in hospitals governed by regulation EN ISO 15883:2009. The sensor can be used within the following industries:

  • Pharmaceutical Industry
  • Medical/Hospitals
  • Fermentation
  • Food and Beverage
  • Sugar Industry
  • Petro-Chemisty
  • Chemical Industry
  • Power Plants

All TrackSense® Pro data loggers can be configured with interchangeable sensors to measure temperature, pressure, relative humidity, CO2, and conductivity. The data loggers can easily be activated and read by the Multi reader station and can be combined with the Sky module for real time data via wireless communication.

 

Contact Sales

Technical Specifications

Sensor with this logger configuration:

High Range Conductivity and Temperature Sensor

Conductivity Range:

200 to 2000 μS/cm

Measuring Principle:

Electrical Conductivity

Sensor Element:

Conductivity / Pt1000 

Contact Material:

Peek (FDA compliant)

Dimensions L x D:

37 mm x 25 mm / 13 mm

Immersion Depth:

Minimum 25 mm

Conductivity Resolution:

0.1 μS/cm

Conductivity Accuracy:

± 1 μS/cm or ± 2.5 % of reading whichever is worse

IP Class:

IP67

Temperature Range:

0 to +85 °C

Temperature Accuracy:

± 0.05 °C

Logger with this sensor configuration:

Pro Basic L

Operating Temperature:

0 to +100 °C

House Material:

316 L Stainless Steel

Diameter:

25 mm

Length:

68.8 mm

Weight With Battery:

80 Grams

Memory Capacity:

60,000 Data Points / 30,000 Samples

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Not ATEX approved

Time Accuracy:

± 5 Seconds Per 24 Hours

Battery:

TS Frigo 85L Battery

ValSuite™ Validation Software
ValSuite™ Validation Software

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:

  • ValSuite™
  • ValSuite™ Medical
  • ValSuite™ Plus
  • ValSuite™ Pro 
Learn more
Multi Reader Station for Data Loggers
Multi Reader Station for Data Loggers

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

Learn more
Sky Module for Wireless Communication
Sky Module for Wireless Communication

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.

Learn more
Follow Us @ Linkedin
Join Us @ Youtube
Contact Us Today
Newsletter Sign up
Sign Up Now

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.
Close