The data loggers can be used for various applications within the life scrience and food and beverage industries. When used with our Conductivity and Temperature Sensor, the following application(s) are covered:
Conductivity Range of
0 to 200 µS/cm
0 to +100 °C
Live Data Option Available
Interchangeable Sensor Design
TrackSense Pro Wireless Data Logger
Conductivity and Temperature Sensor
The Conductivity and Temperature Sensor has a conductivity range of 0 to 200 µS/cm and a temperature range of 0 to +100 °C. Conductivity measurements apply to the control / monitoring of industrial processes and to validate the washing disinfection processes in hospitals governed by regulation EN ISO 15883:2009. The data logger can be used within the pharmaceutical, medical/Hospitals, fermentation, food and beverage, sugar, petro, chemical and power plant industries.
The high quality wireless TrackSense Pro data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.
The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:
✓ Relative humidity
✓ Steam Penetration
The data loggers can easily be activated and read by the Multi reader station and combined with the Sky module for real time data via wireless communication.
High Range Conductivity and Temperature SensorView product
Rigid Temperature SensorView product
4 Bar Pressure SensorView product
6 Bar Pressure SensorView product
8 Bar Pressure SensorView product
Bowie Dick SensorView product
Double Rigid Temperature SensorView product
Double Semi Flexible High Temperature SensorView product
Double Semi Flexible Temperature SensorView product
Internal Temperature SensorView product
Pressure and Rigid Temperature SensorView product
Rigid High Temperature SensorView product
Rigid Multipoint Temperature SensorView product
Rigid and SmartFlex Temperature SensorView product
Rugged Flexible Temperature SensorView product
Semi Flexible High Temperature SensorView product
Semi Flexible Temperature SensorView product
Vacuum SensorView product
Double SmartFlex Temperature SensorView product
Relative Humidity and Temperature SensorView product
SmartFlex Temperature SensorView product
Temperature Thermocouple SensorView product
Key Features and Benefits
One logger - multiple sensor options
21 CFR Part 11 Compliant
Real time data with the SKY module
User-friendly validation software
Usable with E-Val Pro thermocouple system
Sensor with this logger configuration:
Conductivity and Temperature Sensor
0 to 200 μS/cm
Electrical Conductivity / Electrical Resistance
Conductivity / Pt1000
Peek (FDA compliant)
Dimensions L x D:
37 mm x 25 mm / 13 mm
Minimum 25 mm
± 1 μS/cm or ± 2.5 % of reading whichever is worse
0 to +100 °C*
± 0.05 °C
*The Conductivity sensor is not designed for steam
sterilization, but can be autolcaved at +121 °C
Logger with this sensor configuration:
0 to +100 °C
316 L Stainless Steel
Weight With Battery:
120,000 Data Points / 60,000 Samples
Minimum Sample Rate:
Maximum Sample Rate:
Maximum Start Delay:
Ex II1GD Ex ia IIC T3 Ga, -50 °C ≤ Tamb ≤ +105 °C
± 5 Seconds Per 24 Hours
Please Note: If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.
The ValSuite® Software
ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.
The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.
Features and Benefits:
✓ FDA 21 CFR Part 11 compliant
✓ Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options
And much more…
Washer disinfectors are used in both medical and pharmaceutical applications to either prepare goods for future autoclaving (for example surgery instruments to remove residues such as blood and protein) or to disinfect (semi sterilize) goods for later use.
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.
Multi Reader Station
The TrackSense Pro Multi Reader Station is what starts, stops and reads Ellab’s data loggers. The light module can hold up to 4 data loggers at a time, or be extended through expansion modules to read 16 data loggers simultaneously.
The reader stations can be connected directly to the PC via USB or connect to larger-scale IT systems through the LAN connection, easily providing quick information and analysis wherever necessary.
Single Reader Station
The TrackSense Pro Single Reader Station allows for a simple and quick way of starting, stopping and reading data loggers.
The reader station can easily be connected directly to a PC, providing fast transfer of data to generate advanced analysis and reports
SKY Real-time Data Module
The SKY module is a easy plug-and-play real-time data module that allows TrackSense Pro and TrackSense Lab data loggers to transmit live data through wireless transmission.
Whether it is within sealed rooms or hostile environments, the SKY module will effortlessly continue transmitting valuable data.
TrackSense Pro Standard Battery
Ellab offers various high-end batteries for our wide range of wireless data loggers.
The Standard Battery is used for most of the TrackSense data logger sizes and can be stored for up to 10 years and activated whenever needed using the activator unit.