No results
Card image cap
feature icon

Record events during a session (set time markers)

feature icon

Interchangeable Sensor Design

Card image cap

TrackSense Pro Wireless Data Logger

Automarker Sensor

The AutoMarker Sensor can be used to record events during a session. When started, time markers can be added to the session either by manual activation of the switch placed at the cable end or automatically when connected directly to a PLC using the PLC relay function.

Examples of applications the AutoMarker would be used in are:

  • Logging of holding time start/stop from autoclave controller
  • Logging of door openings in warehouse storage, stability chambers, freezers, incubators, etc.
  • Logging of general failure on critical components during process e.g. pump failure
  • Logging emergency shelf cooling activation in freeze dryer

The high quality wireless TrackSense Pro data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.

The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:

✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ Vacuum
✓ Steam Penetration

The data loggers can easily be activated and read by the Multi reader station and combined with the Sky module for real time data via wireless communication.

Sensor Options

product image
Rigid Temperature Sensor
View product
product image
4 Bar Pressure Sensor
View product
product image
6 Bar Pressure Sensor
View product
product image
8 Bar Pressure Sensor
View product
product image
Bowie Dick Sensor
View product
product image
Double Rigid Temperature Sensor
View product
product image
Double Semi Flexible High Temperature Sensor
View product
product image
Double Semi Flexible Temperature Sensor
View product
product image
Internal Temperature Sensor
View product
product image
Pressure and Rigid Temperature Sensor
View product
product image
Rigid High Temperature Sensor
View product
product image
Rigid Multipoint Temperature Sensor
View product
product image
Rigid and SmartFlex Temperature Sensor
View product
product image
Rugged Flexible Temperature Sensor
View product
product image
Semi Flexible High Temperature Sensor
View product
product image
Semi Flexible Temperature Sensor
View product
product image
Vacuum Sensor
View product
product image
Conductivity and Temperature Sensor
View product
product image
Double SmartFlex Temperature Sensor
View product
product image
High Range Conductivity and Temperature Sensor
View product
product image
Relative Humidity and Temperature Sensor
View product
product image
SmartFlex Temperature Sensor
View product
product image
Temperature Thermocouple Sensor
View product

Key Features and Benefits

checkmark

One logger - multiple sensor options

checkmark

21 CFR Part 11 Compliant

checkmark

Real time data with the SKY module

checkmark

User-friendly validation software

checkmark

Usable with E-Val Pro thermocouple system

Sensor with this logger configuration:

Automarker Sensor

Working Principle:

Contact Free Switch Sensor

Switch Cable Plug Type:

LEMO

Number of Switches Per Sensor:

1

Length of Switch Sensor Cable:

100 cm

IP Class:

40

Logger with this sensor configuration:

Pro 3G

Operating Temperature:

+5 to +50 °C

Operating Pressure:

0.9 – 1.1 Bar ABS

Operating Humidity:

10-95%

House Material:

316 L Stainless Steel

Diameter:

25 mm

Length:

44 mm

Weight With Battery:

48 Grams

Memory Capacity:

120,000 Data Points / 120,000 Samples

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga, -50 °C ≤ Tamb ≤ +105 °C

Time Accuracy:

± 5 Seconds Per 24 Hours

Please Note: If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

The ValSuite® Software

ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.

The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.

Features and Benefits:
✓ 
FDA 21 CFR Part 11 compliant
✓ ​Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options

And much more…

Highlighted Features

checkmark One software platform for all Ellab equipment
checkmark Combine TrackSense data loggers and the E-Val Pro wired thermocouple system in the same session
checkmark Automatic PDF report generation with clear pass/fail indication
checkmark Can run from a stand-alone PC or networked
Learn more about the software
software image

Suitable Applications

Ellab Applications

Ellab provides a wide range of diverse products and solutions for the pharmaceutical, medical and food industries all around the world.

See all applications

Suitable Accesories

Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.

Ellab Accesories

Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.

See all Accesories

Downloads and Related Articles

play button

Our new corporate video shows why we are a world leading provider of validation, qualification and calibration solutions

Easily identify the products suitable for your application with the Ellab Product Finder

Product Finder

Do you have a question?

Do you have a question?