No results

    Clamps & Fixtures

    Contact Clamp

    The Contact Clamp is a data logger holding device designed for measuring surface temperature on the outside of pipes.

    Logger Fix

    The Logger Fix is a unique solution for fixating data loggers in a certain position. Designed as a clamp, the flexibility of the polyphenylene material allows it to be easily mounted in various applications

    Fix Pro Case

    The Fix Pro case is a unique solution for protecting and fixating a TrackSense® Pro data logger in position.

    Thermal Barriers & Sleeves

    TTB 64

    The TTB 64 thermal barrier is used for applications where data loggers need to be operated in ambient temperatures between +200 and 400 °C.

    TTB 65

    The TTB 65 thermal barrier is used for applications where data loggers need to be operated in ambient temperatures up to +170 °C.

    TTB 85

    The TTB 85 thermal barrier is used for applications where data loggers need to be operated in ambient temperatures between +200 and 400 °C.

    TBS 40

    The TBS 40 thermal barrier is used for applications where data loggers need to be operated in ambient temperatures between +200 and 400 °C.

    TBF 40

    TBF 40 thermal barrier is used for applications where data loggers need to be operated in ambient temperatures between +200 and 400 °C.

    TTB 35

    The TTB 35 thermal barrier is used for applications where data loggers need to be operated in ambient temperatures between +200 and 400 °C.

    Protective Holder

    This holder is a unique solution, primarily designed for protecting data loggers in corrosive environments – and secondly to fixate data loggers in hanging positions.

    Protective Sleeve

    The protective sleeve for Ellab data loggers is ideal for applications that involve tumbling e.g. in the medical industry when drying clothes.

    Feed Throughs

    Feed-Through System

    Ellab offers a high capacity feed through system developed to perform leak proof insertions of STC thermocouples into e.g. autoclaves.

    Packing Gland

    The packing gland is made of AISI 316 medical grade stainless steel and is easily utilized in an autoclave or retort access port.

    Slipring Contacts

    A slipring contact is available for measuring inside rotating autoclaves, which allow for real time data of temperature, pressure and deflection measurements during processing.

    Batteries

    Standard Data Logger Battery

    The data logger battery incorporates the latest battery technology, which results in 2,000 hours of operation at 10 seconds sample rate at 121 °C.

    Large Data Logger Battery

    The data logger battery incorporates the latest battery technology, which results in 3,000 hours of operation at a 10 seconds sample rate at 121 °C.

    TrackSense® Pro Micro

    The data logger battery is very small and incorporates the latest battery technology, which results in a maximum of 75 hours with a 10 seconds sample rate at 121 °C.

    TrackSense® Pro Mini

    he data logger battery is very small and incorporates the latest battery technology, which results in a maximum of 200/100 hours of operation with a 10 seconds sample rate at 121 °C

    AA 1.5V Lithium Battery

    For use with Hanwell IceSpy Loggers.

    AA 3.6V Lithium Battery

    For use with HL/ML4000 Series of Hanwell Data Loggers.

    AAA 1.5V Alkaline Battery

    For use with Hanwell Bug Data Loggers.

    TrackSense® Frigo – 85L Battery

    The Frigo data logger battery incorporates the latest battery technology, which results in 3,000 hours of operation at a 15 seconds sample rate.

    Contact Pucks

    Contact Puck for RTD Sensors

    The Contact Puck for RTD sensors is made of AISI 316L Stainless steel and designed with a rectangular, flat shape, allowing it to fit into difficult areas.

    Contact Pucks

    Effortlessly measure shelf temperature with Ellab’s selection of weighted Contact Pucks.

    Miscellaneous

    Data Logger Tray

    Made from solid PTFE, these logger trays are ideal for organizing numerous loggers for easy identification.

    Stainless Steel Tip System

    The stainless-steel tip system is a unique and versatile add-on for the TrackSense type TPT PTFE flexible sensors.

    Heat Shrink Labels

    Ideal solution when clear identification of thermocouples or flexible sensors is required. The shrink label is positioned and easily fixed by heat gun operation.

    Flight Case

    Configured with different layers that fit the various Ellab hardware, these hard cases offer a compact design that protects all components from external stress.

    Screw Terminal Plugs

    Two screw terminal sensor plugs for analogue signals are available to expand the measuring parameters of the E-Val Pro thermocouple system.

    Deflection System

    Deflection measurements make it possible to establish the process parameters, so that flexible and semi-rigid containers can be processed with as little mechanical stress and deformation as possible.

    Data Logger ID Rings

    Mainly used in the pharmaceutical or medical industries where several data loggers are being operated at once, and sequences or data logger identities are required.

    Suitcases

    Taking good care of your valuable validation equipment is essential for keeping the performance level at its best. Our suitcases help to protect equipment and prevent unexpected downtime due to poorly packed devices being damaged.

    Easily identify the products suitable for your application with the Ellab Product Finder

    Launch the product finder