No results
Card image cap
feature icon

For both
121 °C and 134 °C tests

feature icon

Eliminates guesswork and
provides an objective result

feature icon

ISO 11140-4 Compliant

Card image cap

TrackSense Pro X Wireless Data Logger

Bowie Dick Sensor

This highly compact Bowie Dick Sensor is the only electronic test device on the market designed for 121 °C processes – and, when necessary, 134 °C. The sensor provides far more insight into critical sterilization parameters than previously possible, making it a critical tool for any steam penetration study.

Unlike traditional chemical indicators, where you subjectively decide according to a change in color, this device provides you with an accurate report that eliminates any guess work.

The device is extremely easy to use and requires little to no training. With just a single click in the software, the unit will start to measure and record data. Once the Bowie Dick Test Program is done, the device is simply placed back in the reader station where the software automatically processes the data and provides a test result – simple and easy!

The high quality wireless TrackSense Pro X data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.

The TrackSense Pro X data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:

✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ Vacuum
✓ ​Steam Penetration

The data loggers can easily be activated and read by the Multi reader station.

Sensor Options

product image
8 Bar Pressure Sensor
View product
product image
Conductivity and Temperature Sensor
View product
product image
Double Rigid Temperature Sensor
View product
product image
Internal Temperature Sensor
View product
product image
High Range Conductivity and Temperature Sensor
View product
product image
Rigid Temperature Sensor
View product
product image
Rigid and SmartFlex Temperature Sensor
View product
product image
Automarker Sensor
View product
product image
4 Bar Pressure Sensor
View product
product image
6 Bar Pressure Sensor
View product
product image
Double Semi Flexible High Temperature Sensor
View product
product image
Double Semi Flexible Temperature Sensor
View product
product image
Double SmartFlex Temperature Sensor
View product
product image
Temperature Thermocouple Sensor
View product
product image
Vacuum Sensor
View product
product image
SmartFlex Temperature Sensor
View product
product image
Semi Flexible Temperature Sensor
View product
product image
Semi Flexible High Temperature Sensor
View product
product image
Pressure and Rigid Temperature Sensor
View product
product image
Relative Humidity and Temperature Sensor
View product
product image
Rigid High Temperature Sensor
View product
product image
Rigid Multipoint Temperature Sensor
View product
product image
Rugged Flexible Temperature Sensor​
View product

Key Features and Benefits

checkmark

Uniquely designed for both 121 °C and 134 °C tests

checkmark

Accurate, reliable and cost efficient

checkmark

Very compact size

checkmark

User-friendly and intuitive software

checkmark

Eliminates guesswork and provides an objective result

checkmark

Replaceable PCD to run several cycles in a sequence

checkmark

Verification of critical sterilization parameters

Sensor with this logger configuration:

Bowie Dick Sensor

ISO Standard Compliance:

11140-4:2007 type B1, B2 and B3 at 121 °C and 134 °C

3rd Party Test Institute:

SAL GmbH

Type of Sterilizers:

Steam Sterilizers / Autoclaves qualified for sterilization at 121°C or +134 °C according to EN 285 (volume larger than 60 L) and EN ISO 17665 (moist heat autoclaves)

Measuring Principle:

Piezoresistive / Electrical Resistance

Sensor Type:

Strain Gauge / Pt1000

Temperature Measuring Range:

0 to +140 °C (Calibrated +25 to +140 °C)

Temperature Accuracy: +25 to +140 °C:

± 0.05 °C

Temperature Response Time:

T-63%:

0.8 Second

T-90%:

1.7 Second

Pressure Measuring Range:

10 mBar to 6 Bar

Accuracy:

± 0.25% Full Scale (± 15 mBar)

PCD Housing Material:

PEEK

Logger with this sensor configuration:

Pro X 3G

Operating Temperature:

-20 to +150 °C

Operating Pressure:

0.001 mBar to 10 Bar ABS

House Material:

316L Stainless Steel

Diameter:

25 mm

Length:

100.2 mm including PCD (30 mm)

Weight With Battery:

208 g

Memory Capacity:

120,000 Data Points / 30,000 Samples

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga, -60 °C ≤ Tamb ≤ +105 °C

Time Accuracy:

± 5 Seconds Per 24 Hours

Please Note: If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

The ValSuite® Software

ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.

The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.

Features and Benefits:
✓ FDA 21 CFR Part 11 compliant
✓ ​Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options

And much more…

Highlighted Features

checkmark One software platform for all Ellab equipment
checkmark Combine TrackSense data loggers and the E-Val Pro wired thermocouple system in the same session
checkmark Automatic PDF report generation with clear pass/fail indication
checkmark Can run from a stand-alone PC or networked
Learn more about the software
software image

Suitable Applications

The data loggers can be used for various applications within the life science and food & beverage industries.
When used with our Bowie Dick Sensor, the following application(s) are covered:

Ellab Applications

Ellab provides a wide range of diverse products and solutions for most applications, all around the world.

See all applications

Suitable Accessories

Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.

Ellab Accessories

Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.

See all Accessories

Downloads and Related Articles

play button

Our new corporate video shows why we are a world leading provider of validation, qualification and calibration solutions

Easily identify the products suitable for your application with the Ellab Product Finder

Product Finder

Do you have a question?

Do you have a question?