Your Trusted Source of Validation and Calibration Knowledge
- Gain more insight into the world of validation
Ellab offers an ever-growing source of knowledge on various validation processes, applications and products.
How to Secure your Vaccine Storage
One of the biggest concerns when handling vaccines is how much heat they are exposed to during their lifecycle. Therefore, it is extremely important to control the cold chain.
Qualification of Dry Heat Sterilizers - Critical Factors
There are several critical factors to take into concern when qualifying dry heat sterilizers. One of them is the spread of temperature across the belt during the depyrogenation process.
Environmental Monitoring of Stability Chambers and Warehouses
Stable and reliable monitoring and qualification of stability chambers is important to secure the storage conditions and avoid costly deviations. An ideal solution is using data loggers with alarm functions.
Validating UHT and HTST Pasteurization Processes
Validating a pasteurization process, such as UHT or HTST, includes several considerations, of which identifying the locations of the critical measuring point is of most importance.
Qualifying Washer Disinfectors for Minimally Invasive Surgery (MIS) Instruments
One challenge associated with qualifying washer disinfectors for minimally invasive surgery (MIS) instruments, is to check that the flow of rinsing water through the piping is adequate enough to ensure disinfection.
Bowie Dick Testing - Routine Control of Autoclaves
Ensuring that surgical and procedural hospital equipment is
completely clean and sterile is of utmost importance to protect
patients against infections and contagious diseases.
Download Application Note
Choosing Fluids for Calibration Baths
Things to Consider when Choosing Fluids for Calibration Baths is a short white paper regarding the most suitable fluids for your application.
The Freeze Drying Theory and Process - Things to Consider
Read about typical types of validation equipment for freeze drying as well as the basic theory, process monitoring, validation and process steps.
6 key Differences Between RTD’s and Thermocouples
This paper highlights the 6 most important differences between RTD’s and thermocouples by delving into the technology-based advantages and disadvantages of each type of sensor.
Temperature Mapping - Facts and Considerations
Get more knowledgeable on the important facts and considerations when performing temperature mapping - or when looking for a temperature mapping contractor.
Control and Validation of the Steam Sterilization Process
Steam sterilization is a highly common method used for sterilizing items or goods. The main purpose of steam sterilization is to deactivate microorganism through total elimination of germs providing a sterile product for later use.
How to Avoid Common Pitfalls when Operating Dry Blocks
This paper provides you with the required insight to avoid the most basic problems and overcome most of the challenges associated with using dry blocks for temperature calibration.
The Evolution of the Bowie Dick Test
Learn how the Bowie Dick test developed from a simple process involving towels and chemical indicator tape to a highly sophisticated electronic device with clear pass/fail indication.
Advantages of Using a Wired Thermocouple System
In this Product Spotlight we will go through some of the advantages of using a wired thermocouple system as well as make a comparison analysis of Ellab’s E-Val™ Pro vs. traditional cable systems (validators) available on the market.
Download Product Spotlight
SteriSense® - Electronic Bowie Dick Test
In this Product Spotlight we will go through the importance of high quality steam sterilization and the advantages of using Ellab’s Electronic Bowie Dick testing device, SteriSense to achieve ultimate peace of mind.
Wireless Data Loggers and the Advantages of Using them
Learn about the purpose of using wireless data loggers, why they are important and the main advantages of using them.
The Importance of Instrument Calibration
Find out why performing instrument calibrations is critical and what advantages can be achieved through regular calibrations.
Using Interchangeable Sensors