jpgFeature/sdesk 696 implement raw brick http
TrackSense Pro X Wireless Data Logger - Temperature Thermocouple Sensor

TrackSense Pro X Wireless Data Logger - Temperature Thermocouple Sensor

Ellab’s unique Temperature Thermocouple Sensor (TC Sensor) now allows users worldwide to use thermocouples in conjunction with wireless data loggers. The Temperature Thermocouple Sensor is especially designed for applications that cause a lot of strain on sensors and require as little impact on samples as possible. A good example of said applications would be Lyophilization, also known as Freeze-drying.

Key Features and Benefits

✓ One logger - multiple sensor options
  21 CFR Part 11 Compliant
  Real time data with the SKY module
✓  User-friendly validation software
✓  Can be steam sterilized
✓  Replaceable thermocouple wires
  Increased temperature range when using various type T thermocouples


Contact Us
Description Technical Specifications Software Applications Accessories

TrackSense Pro X Wireless Data Logger

The high quality wireless TrackSense Pro X data loggersconsist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.

The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:

✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ Vacuum
✓ ​Steam Penetration

The data loggers can easily be activated and read by the Multi reader station and combined with the Sky module for real time data via wireless communication.


Technical Specifications

Technical Specifications

Sensor with this logger configuration:

Temperature ​Thermocouple Sensor*

Temperature Measuring Range:

-80 to +62 °C (Calibrated from -60 to +60 °C) 
-196 to +400 °C when keeping the logger at ambient temperature and using appropriate thermocouple wire

Measuring Principle:

Thermoelectric Effect

Sensor Element:



± 0.3 °C Calibrated

Position of Measuring Point from Tip:

0 mm

Cable Length:

10, 30, 50 or 100 cm

Cable Dimensions and Type:

0.55 x 0.95 mm type AWG30 with naked tip

Sensor Response Time:


0.03 Second


0.09 Second

Logger with this sensor configuration:

Pro X 3G

Operating Temperature:

-80 to +62 °C

Operating Pressure:

0.001 mBar to 4 Bar ABS

House Material:

316 L Stainless Steel


25 mm


44 mm

Weight With Battery:

48 Grams

Memory Capacity:

120,000 Data Points / 40,000 Samples

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga,  -60 °C ≤ Tamb ≤ +105 °C

Time Accuracy:

± 5 Seconds Per 24 Hours


TSP Standard Battery

*Requires ValSuite® or later and logger firmware version 26.9 or later

Please Note: If equipment is used in ATEX environment, 
special conditions for safe use stated in ATEX certificates 
section 17 must be considered.


ValSuite® Validation Software

ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features. 

The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines. 

Features and Benefits:
FDA 21 CFR Part 11 compliant
✓ ​Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options 

And much more...

Learn more about our Software

Suitable applications

The data loggers can be used for various applications within the life scrience and food and beverage industries. When used with our Temperature Thermcouple Sensor, the following applications are covered: 

Life Science:

Food and Beverages:
 UHT and HTST Pasteurization


View our Applications


Ellab also offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points. 

Fittings and Accessories

Thermocouple Wire
The thin thermocouple wire is equipped with a “naked tip” that takes up next to no room within a sample and provides users with a faster response time. The sensor itself has a temperature range of -80 to +62 °C (calibrated from -60 to +60 °C) with a state of the art accuracy of ±0.3 °C. In addition to this, the wire comes in 10, 30, 50 and 100 cm lengths (30 cm standard), offering an additional layer of versatility.

Increased Temperature Range
When keeping the data logger at ambient temperature, it is also possible to insert a wired sensor into other applications that require a wider temperature range. By using standard type T thermocouple sensors in various materials and lengths, the highly versatile Temperature Thermocouple Sensor can cover a temperature range of -196 to +400 °C.

Get more information

Replace Thermocouple Sensors with Ease
The feature that makes this sensor highly unique, is the ability to have the thermocouple wire replaced via a screw terminal after a prolonged series of use. Typically, if wires get strained through rough handling or immensely demanding applications, the entire sensor head would have to be replaced – now with the Temperature Thermocouple Sensor, bundles of thermocouple wires can easily be acquired through Ellab and replace the single damaged wire, resulting in a far more cost-efficient process.


Follow Us @ Linkedin
Join Us @ Youtube
Contact Us Today
Newsletter Sign up
Sign Up Now