For Wireless Data Loggers
TrackSense® Frigo – 85L Battery
Data Logger Battery
Battery life greatly depends on the application and logger use profile. Extensive ramping and duration at higher temperatures can reduce the average lifetime of the battery. The Frigo data logger battery incorporates the latest battery technology, which results in 3,000 hours of operation at a 15 seconds sample rate. This number is increased to 13 months when using a 10 minutes sample rate at -80 °C.
Advantages of using Ellab TrackSense Pro batteries:
✔ Ensures data logger performance and measuring accuracy
✔ Eliminates unexpected downtime and damage
✔ Can be stored for up to 10 years – only activated prior to use
✔ Valid product warranty when used in specified measuring areas
✔ Traceability by serial numbers
Operating Logger
Frigo, Basic L
Battery Type:
Lithium AA
Nominal Voltage:
3.6 V
Nominal Capacity:
2.2 Ah
Nominal Current:
2 mA
Max. Continuous Discharge Current:
100 mA
Lithium Content:
0.65 g
Weight:
18 g
Volume:
8 cm3
WARNING: Fire, explosion and severe burn hazard.
Do not recharge, disassemble, heat above 100 °C,
incinerate or expose contents to water.
Frigo Capacity in a Continuous run:
Temperature at -80 °C with 15 Seconds Sample Rate:
3,000 hours
Temperature at -80 °C with 10 Minutes Sample Rate:
13 months
Basic L Capacity at 40 °C with 2 Minutes Sample Rate:
CO2:
150 hours
Downloads and Related Articles
Our new corporate video shows why we are a world leading provider of validation, qualification and calibration solutions