
TrackSense Pro Basic Wireless Data Logger - Double Rigid Temperature Sensor
Ellab’s high quality wireless TrackSense® Pro data loggers are made of resistant stainless steel and offers high-end technology that allows for stable and immensely accurate measurements within various thermal processes.
The Double Rigid Temperature Sensor with round tip, is equipped with one straight and one bent-sensor (either bent 90 ° or 180 °). It has a temperature range of -30 to +105 °C with an unmatched accuracy of ±0.05 °C (in range -25 to +105 °C). It is mainly used in applications within the food industry, such as retort sterilization studies involving heat penetration and heat distribution.
Ellab’s TrackSense® Pro data loggers can all be configured with interchangeable sensors to measure pressure, relative humidity, temperature, CO2, and conductivity. The data loggers are easily activated and read by the Multi reader station and when combined with the Sky module they provide real time date via wireless communication.
Technical Specifications
Sensor with this logger configuration: |
Double Rigid Temperature Sensor |
Temperature Measuring Range: |
-30 to +105 °C |
Measuring Principle: |
Electrical Resistance |
Sensor Element: |
Pt1000 |
Diameter: |
2 mm |
Length: |
From 10 mm |
Position of Measuring Point from Tip: |
3 mm |
Accuracy: |
|
-30 to -25 °C: |
± 0.1 °C |
-25 to +105 °C: |
± 0.05 °C |
Sensor Response Time: |
|
T-63%: |
0.8 Second |
T-90%: |
1.7 Second |
Logger with this sensor configuration: |
Pro Basic 3G |
Operating Temperature: |
-30 to +105 °C |
Operating Pressure: |
0.01 mBar to 10 Bar ABS |
House Material: |
316 L Stainless Steel |
Diameter: |
25 mm |
Length: |
44 mm |
Weight With Battery: |
48 Grams |
Memory Capacity: |
120,000 Data Points / 60,000 Samples |
Minimum Sample Rate: |
1 Second |
Maximum Sample Rate: |
24 Hours |
Maximum Start Delay: |
14 Days |
Intrinsically Safe: |
Ex II1GD Ex ia IIC T3 Ga, -30°C ≤ Tamb ≤ +105°C |
Time Accuracy: |
± 5 Seconds Per 24 Hours |
Battery: |
If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered. |

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:
- ValSuite™
- ValSuite™ Medical
- ValSuite™ Plus
- ValSuite™ Pro

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.