The data loggers can be used for various applications within the life science and food and beverage industries. When used with our Rigid Multipoint Temperature Sensor, the following application(s) is covered:
Temperatures Range of
-30 to +105 °C
Interchangeable Sensor Design
TrackSense Pro Basic Wireless Data Logger
Rigid Multipoint Temperature Sensor
The Rigid Multipoint Temperature Sensor is used to determine temperature differences in containers to locate the cold spot with a total of 4 Pt1000 elements measuring simultaneously. It has a temperature range of -30 °C to +105 °C with an unmatched accuracy of ± 0.05 °C (in range -25 °C to +105°C). The sensor is especially useful within the food industry, as it provides 4 measuring points that can easily identify the cold and hot zones in containers.
The high quality wireless TrackSense Pro Basic data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.
The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:
✓ Relative humidity
Rigid Multipoint Temperature SensorView product
6 Bar Pressure SensorView product
8 Bar Pressure SensorView product
Conductivity and Temperature SensorView product
Relative Humidity and Temperature SensorView product
Rigid Temperature SensorView product
Double Rigid Temperature SensorView product
Double Semi Flexible Temperature SensorView product
Double SmartFlex Temperature SensorView product
Internal Temperature SensorView product
Pressure and Rigid Temperature SensorView product
Rigid and SmartFlex Temperature SensorView product
Rugged Flexible Temperature SensorView product
Semi Flexible Temperature SensorView product
SmartFlex Temperature SensorView product
Temperature Thermocouple SensorView product
Vacuum SensorView product
High Range Conductivity and Temperature SensorView product
Key Features and Benefits
One logger - multiple sensor options
21 CFR Part 11 Compliant
User-friendly validation software
Usable with E-Val Pro thermocouple system
Sensor with this logger configuration:
Rigid Multipoint Temperature Temperature
Temperature Measuring Range:
-30 to +105 °C
50 or 100 mm
Position of Measuring Point from Tip:
-30 to -25 °C:
± 0.1 °C
-25 to +105 °C:
± 0.05 °C
Sensor Response Time:
Logger with this sensor configuration:
Pro Basic 3G
-30 to +105 °C
0.001 mBar to 10 Bar ABS
316 L Stainless Steel
Weight With Battery:
120,000 Data Points / 30,000 Samples
Minimum Sample Rate:
Maximum Sample Rate:
Maximum Start Delay:
Ex II1GD Ex ia IIC T3 Ga, -30 °C ≤ Tamb ≤ +105 °C
± 5 Seconds Per 24 Hours
Please Note: If equipment is used in ATEX environment,
special conditions for safe use stated in ATEX certificates
section 17 must be considered.
The ValSuite® Software
ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.
The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.
Features and Benefits:
✓ FDA 21 CFR Part 11 compliant
✓ Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options
And much more…
Food and Beverages
Tunnel Pasteurizers are used in the food industry for heat treatment of products such as beer, soft drinks and acid preserves (fruits, acidified vegetables or pickles) etc. that are kept in closed bottles or cans. Precise water temperatures must be reached to gradually heat the product in the bottle or can to pasteurization temperature, as well as to cool it down afterwards.
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.
Multi Reader Station
The TrackSense Pro Multi Reader Station is what starts, stops and reads Ellab’s data loggers. The light module can hold up to 4 data loggers at a time, or be extended through expansion modules to read 16 data loggers simultaneously.
The reader stations can be connected directly to the PC via USB or connect to larger-scale IT systems through the LAN connection, easily providing quick information and analysis wherever necessary.
Single Reader Station
The TrackSense Pro Single Reader Station allows for a simple and quick way of starting, stopping and reading data loggers.
The reader station can easily be connected directly to a PC, providing fast transfer of data to generate advanced analysis and reports
TrackSense Pro Standard Battery
Ellab offers various high-end batteries for our wide range of wireless data loggers.
The Standard Battery is used for most of the TrackSense data logger sizes and can be stored for up to 10 years and activated whenever needed using the activator unit.