jpgFeature/sdesk 696 implement raw brick http
TrackSense Pro Basic Wireless Data Logger - Thermocouple Sensor

TrackSense Pro Basic Wireless Data Logger - Thermocouple Sensor

Ellab’s unique Thermocouple Sensor (TC Sensor) now allows users worldwide to use thermocouples in conjunction with wireless data loggers. The Thermocouple Sensor is especially designed for applications that cause a lot of strain on sensors and require as little impact on samples as possible. A good example of said applications would be Lyophilization, also known as Freeze-drying.

Replace Thermocouple Sensors with Ease
The feature that makes this sensor highly unique, is the ability to have the thermocouple wire replaced via a screw terminal after a prolonged series of use. Typically, if wires get strained through rough handling or immensely demanding applications, the entire sensor head would have to be replaced – now with the Thermocouple Sensor, bundles of thermocouple wires can easily be acquired through Ellab and replace the single damaged wire, resulting in a far more cost-efficient process.


Contact Sales

Thermocouple Wire
The thin thermocouple wire is equipped with a “naked tip” that takes up next to no room within a sample and provides users with a faster response time. The sensor itself has a temperature range of -30 to +62 °C (sensor calibrated from -60 to +60 °C) with a state of the art accuracy of ± 0.3 °C. In addition to this, the wire comes in 10, 30, 50 and 100 cm lengths (30 cm standard), offering an additional layer of versatility.

Increased Temperature Range
When keeping the data logger at ambient temperature, it is also possible to insert a wired sensor into other applications that require a wider temperature range. By using standard type T thermocouple sensors in various materials and lengths, the highly versatile Thermocouple Sensor can cover a temperature range of -30 and +105 °C.

Key Features & Benefits
Compatible with LYO fitting for Freeze-drying
✓  Ideal for applications that highly strain wires
✓  Can be steam sterilized
✓  Replaceable thermocouple wires
  Increased temperature range when using various type T thermocouples

Technical Specifications

Sensor with this logger configuration:

Thermocouple Sensor*

Temperature Measuring Range:

-30 to +62 °C (Calibrated from -60 to +60°C)
-30 to +105 °C when keeping the logger at ambient temperature

Measuring Principle:

Thermoelectric Effect

Sensor Element:



± 0.3°C Calibrated

Position of Measuring Point from Tip:

0 mm

Cable Length:

10, 30, 50 or 100 cm

Cable Dimensions and Type:

0.55 x 0.95 mm type AWG30 with naked tip

Sensor Response Time:


0.03 Second


0.09 Second

Logger with this sensor configuration:

Pro Basic 3G

Operating Temperature:

-30 to +105 °C

Operating Pressure:

0.0001 mBar to 4 Bar ABS

House Material:

316 L Stainless Steel


25 mm


44 mm

Weight With Battery:

48 Grams

Memory Capacity:

120,000 Data Points / 40,000 Samples

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga,  -30°C ≤ Tamb ≤ +105°C

Time Accuracy:

± 5 Seconds Per 24 Hours


TSP Standard Battery

* Require ValSuite™ or later, and logger firmware version 26.9 or later.

ValSuite™ Validation Software
ValSuite™ Validation Software

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:

  • ValSuite™
  • ValSuite™ Medical
  • ValSuite™ Plus
  • ValSuite™ Pro 
Learn more
Multi Reader Station for Data Loggers
Multi Reader Station for Data Loggers

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

Learn more
Sky Module for Wireless Communication
Sky Module for Wireless Communication

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.

Learn more
Follow Us @ Linkedin
Join Us @ Youtube
Contact Us Today
Newsletter Sign up
Sign Up Now

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.