jpgFeature/sdesk 696 implement raw brick http
TrackSense Pro XL Wireless Data Logger - Internal Temperature Sensor
TrackSense Pro XL Wireless Data Logger - Internal Temperature Sensor

The high quality wireless TrackSense® Pro XL data loggers consist of resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes. The XL logger is an enlarged logger with an extended battery capacity, which makes it exceptional for applications involving vast swings in temperature.

The Internal Temperature Sensor has a temperature range of -80 to +150 °C with an unmatched accuracy of 0.05 °C (in range -25 to +150 °C). It can be used for a wide range of applications within the food and pharmaceutical industries, and is especially ideal for applications where space is limited and/or the maximum protection of a sensor is required. 

All TrackSense® Pro data loggers can be configured with interchangeable sensors to measure temperature, pressure, relative humidity, CO2, and conductivity. The data loggers can easily be activated and read by the Multi reader station and can be combined with the Sky module for real time data via wireless communication.

 

Contact Sales

Technical Specifications

Sensor with this logger configuration:

Internal Temperature Sensor

Temperature Measuring Range:

-80 to +150 °C

Measuring Principle:

Electrical Resistance

Sensor Element:

Pt1000 

Diameter:

NA

Length:

NA

Position of Measuring Point from Tip:

NA

Accuracy:

-80 to -50 °C:

± 0.3 °C

-50 to -40 °C:

± 0.2 °C

-40 to -25 °C:

± 0.1 °C

-25 to +150 °C:

± 0.05 °C

Sensor Response Time:

T-63%:

11 Seconds

T-90%:

42 Seconds

Logger with this sensor configuration:

Pro XL

Operating Temperature:

-80 to +150 °C

Operating Pressure:

0.001 mBar to 10 Bar ABS

House Material:

316 L Stainless Steel

Diameter:

25 mm

Lenght:

68.8 mm

Weight With Battery:

80 Grams

Memory Capacity:

60,000 Data Points / 60,000 Samples

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga,  -55°C ≤ Tamb ≤ +105°C

Time Accuracy:

± 5 Seconds Per 24 Hours

Battery:

TSP 150L Battery

If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

ValSuite™ Validation Software
ValSuite™ Validation Software

ValSuite™ Pro is an intuitive validation software which collects and presents validation data from all Ellab measuring devices. The software package is designed for Windows 10, 64 Bit. The software is developed according to GAMP principles. ValSuite™ is availabe in four versions:

  • ValSuite™
  • ValSuite™ Medical
  • ValSuite™ Plus
  • ValSuite™ Pro 
Learn more
Multi Reader Station for Data Loggers
Multi Reader Station for Data Loggers

The TrackSense Pro Multi Reader Station is engineered with flexibility and speed in mind. The station has 4 positions for loggers and is connected to the PC via USB. By using the USB port, power is supplied directly from your PC reducing the need for an external power source. Starting up and reading loggers can now be performed in seconds. 16 data loggers can be started or read simultaneously, saving time, especially when 160 data loggers have to be started for one study.

Learn more
Sky Module for Wireless Communication
Sky Module for Wireless Communication

The Sky module contains all the necessary components for wireless communication between the logger and the Sky Access Point. An external antenna is also available for more difficult transmission environments.

Learn more
Follow Us @ Linkedin
Join Us @ Youtube
Contact Us Today
Newsletter Sign up
Sign Up Now

This website uses cookies to improve your experience. We'll assume you're ok with that, but you can opt-out if you wish.

Read more.
Close