No results
Card image cap
feature icon

Temperature Range of
-80 to +62 °C

feature icon

Live Data Option Available

feature icon

Interchangeable Sensor Design

Card image cap

TrackSense Pro XL Data Logger

Temperature Thermocouple Sensor

Ellab’s unique Temperature Thermocouple Sensor (TC Sensor) now allows users worldwide to use thermocouples in conjunction with wireless data loggers. The Temperature Thermocouple Sensor  has a temperature measuring range of -80 to +62 °C and is especially designed for applications that cause a lot of strain on sensors and require as little impact on samples as possible. A good example of said applications would be Lyophilization, also known as Freeze-drying.

The high quality wireless TrackSense Pro XL data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.

The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:

✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ CO2
✓ Vacuum
✓ ​Steam Penetration

The data loggers can easily be activated and read by the Multi reader station and combined with the Sky module for real time data via wireless communication.

Sensor Options

product image
8 Bar Pressure Sensor
View product
product image
Automarker Sensor
View product
product image
Conductivity and Temperature Sensor
View product
product image
Double Rigid Temperature Sensor
View product
product image
Double Semi Flexible High Temperature Sensor
View product
product image
Double Semi Flexible Temperature Sensor
View product
product image
Double SmartFlex Temperature Sensor
View product
product image
High Range Conductivity and Temperature Sensor
View product
product image
Internal Temperature Sensor
View product
product image
Pressure and Rigid Temperature Sensor
View product
product image
Relative Humidity and Temperature Sensor
View product
product image
Rigid High Temperature Sensor
View product
product image
Rigid Multipoint Temperature Sensor
View product
product image
Rigid Temperature Sensor
View product
product image
Rigid and SmartFlex Temperature Sensor
View product
product image
Rugged Flexible Temperature Sensor
View product
product image
Semi Flexible Temperature Sensor
View product
product image
SmartFlex Temperature Sensor
View product
product image
Vacuum Sensor
View product
product image
4 Bar Pressure Sensor
View product
product image
6 Bar Pressure Sensor
View product
product image
Bowie Dick Sensor
View product
product image
Semi Flexible High Temperature Sensor
View product

Key Features and Benefits

checkmark

One logger - multiple sensor options

checkmark

21 CFR Part 11 Compliant

checkmark

Real time data with the SKY module

checkmark

User-friendly validation software

checkmark

Can be steam sterilized

checkmark

Replaceable thermocouple wires

checkmark

Increased temperature range when using various type T thermocouples

Sensor with this logger configuration:

Temperature ​Thermocouple Sensor

Temperature Measuring Range:

-80 to +62 °C (Calibrated from -60 to +60 °C)
-196 to +400 °C when keeping the logger at ambient temperature and using appropriate thermocouple wire

Measuring Principle:

Thermoelectric Effect

Sensor Element:

Thermocouple Type T

Accuracy:

± 0.3 °C Calibrated

Position of Measuring Point from Tip:

0 mm

Cable Length:

10, 30, 50 or 100 cm

Cable Dimensions and Type:

0.55 x 0.95 mm type AWG30 with naked tip

Sensor Response Time:

T-63%:

0.03 Second

T-90%:

0.09 Second

Logger with this sensor configuration:

Pro XL 3G

Operating Temperature:

-80 to +62 °C

Operating Pressure:

0.001 mBar to 4 Bar ABS

House Material:

316 L Stainless Steel

Diameter:

25 mm

Length:

68.8 mm

Weight With Battery:

80 Grams

Memory Capacity:

120,000 Data Points / 40,000 Samples

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours

Maximum Start Delay:

14 Days

Intrinsically Safe:

Ex II1GD Ex ia IIC T3 Ga, -50 °C ≤ Tamb ≤ +105 °C

Time Accuracy:

± 5 Seconds Per 24 Hours

Battery:

*Require ValSuite™ 5.1.0.11 or later, and logger
firmware version 26.9 or later.

Please Note: If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.

The ValSuite® Software

ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.

The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.

Features and Benefits:
✓ 
FDA 21 CFR Part 11 compliant
✓ ​Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options

And much more…

Highlighted Features

checkmark One software platform for all Ellab equipment
checkmark Combine TrackSense data loggers and the E-Val Pro wired thermocouple system in the same session
checkmark Automatic PDF report generation with clear pass/fail indication
checkmark Can run from a stand-alone PC or networked
Learn more about the software
software image

Suitable Applications

The data loggers can be used for various applications within the life scrience and food and beverage industries. When used with our Double SmartFlex Temperature Sensor, the following applications are covered:

Ellab Applications

Ellab provides a wide range of diverse products and solutions for mist application, all around the world.

See all applications

Suitable Accessories

Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.

Ellab Accessories

Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.

See all Accessories

Downloads and Related Articles

play button

Our new corporate video shows why we are a world leading provider of validation, qualification and calibration solutions

Easily identify the products suitable for your application with the Ellab Product Finder

Product Finder

Do you have a question?

Do you have a question?