jpgFeature/sdesk 696 implement raw brick http
TrackSense Pro Wireless Data Logger - Bowie Dick Sensor

TrackSense Pro Wireless Data Logger - Bowie Dick Sensor

This highly compact Bowie Dick Sensor is the only electronic test device on the market designed for 121 °C processes - and, when necessary, 134 °C. The sensor provides far more insight into critical sterilization parameters than previously possible, making it a critical tool for any steam penetration study.

Unlike traditional chemical indicators, where you subjectively decide according to a change in color, this device provides you with an accurate report that eliminates any guess work.

The device is extremely easy to use and requires little to no training. With just a single click in the software, the unit will start to measure and record data. Once the Bowie Dick Test Program is done, the device is simply placed back in the reader station where the software automatically processes the data and provides a test result – simple and easy!


Key Features and Benefits

  Uniquely designed for both 121 and 134 °C tests
✓  Accurate, reliable and cost efficient
  Very compact size
  User-friendly and intuitive software
✓  Eliminates guesswork and provides an objective result
✓  Replaceable PCD to run several cycles in a sequence
✓  Verification of critical sterilization parameters 
 

Contact Us
Description Technical Specifications Software Applications Accessories
Description

TrackSense Pro Wireless Data Logger

The high quality wireless TrackSense Pro data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.

The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:

✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ Vacuum
✓ ​Steam Penetration

Technical Specifications

Technical Specifications



Sensor with this logger configuration:

Bowie Dick Sensor

ISO Standard Compliance:

11140-4:2007 type B1, B2 and B3 at 121 °C and 134 °C

3rd Party Test Institute:

SAL GmbH 

Type of Sterilizers: 

Steam Sterilizers / Autoclaves qualified for sterilization at 121°C or +134 °C
according to EN 285 (volume larger than 60 L) and EN ISO
17665 (moist heat autoclaves) 

Measuring Principle:

Piezoresistive / Electrical Resistance 

Sensor Type: 

Strain Gauge / Pt1000 

Temperature Measuring Range:

0 to +140 °C (Calibrated +25 to +140 °C)

Temperature Accuracy: +25 to +140 °C:

± 0.05 °C 

Temperature Response Time:

T-63% 

0.8 Second

T-90% 

1.7 Second

Pressure Measuring Range:

10 mBar to 6 Bar

Accuracy: 

± 0.25% Full Scale (± 15 mBar)

PCD Housing Material: 

PEEK

Logger with this sensor configuration:

Pro 3G ​

Operating Temperature:

-20 to +150 °C 

Operating Pressure:

0.001 mBar to 10 Bar ABS 

Housing Material

316L Stainless Steel 

Diameter:

25 mm

Length:

100.2 mm including PCD (30 mm) 

Weight with Battery:

208 g 

Memory Capacity:

120,000 Data Points / 30,000 Samples

Minimum Sample Rate:

1 Second

Maximum Sample Rate:

24 Hours 

Intrinsically Safe: 

Ex II1GD ia IIC T3 Ga, -50 °C ≤ Tamb ≤ +105 °C

Time Accuracy: 

± 5 Seconds Per 24 Hours 

Battery:

TSP Standard Battery


Please Note: If equipment is used in ATEX environment, 
special conditions for safe use stated in ATEX certificates 
​section 17 must be considered.

Software

ValSuite® Validation Software

ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features. 

The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines. 

Features and Benefits:
✓ 
FDA 21 CFR Part 11 compliant
✓ ​Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options 

And much more...

 

Learn more about our software
Applications

Suitable Applications

The data loggers can be used for various applications within the life science industry. When used with our Bowie Dick Sensor, the following applications are covered: 

Life Science:
 Bowie Dick Testing
 Steam Sterilization
 

View our Applications
Accessories

Accessories

Ellab also offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points. 

 
Fittings and Accessories
Follow Us @ Linkedin
Join Us @ Youtube
Contact Us Today
Newsletter Sign up
Sign Up Now